The Marine Grade glue-in bolt was introduced to address the corrosion issues in Thailand and other marine environments. When properly placed, glue-in bolts do not make physical contact with the limestone.

We suggest using the Lapafil resin glue when installing Marine Grade glue-in.

When placed properly in good stone glue-in bolts are the strongest anchors available. Patience and experience are required when installing glue-in bolts. The mixing and installation of the glue is the key to a correctly placed glue-in. This type of bolt works excellent in soft or pocketed stone. Although not widely used in the US glue-in bolts are common in Europe.

• A316 Marine Grade Stainless
• #014-M - 10x80mm
• 12mm or 1/2" hole required